Home > Case / Ammunition Gauge
9mm Case & Ammunition Gauge - All New Patented Tri-Step Face Design
Part Number 9mm CASE GAUGE
9mm Case & Ammunition Gauge - All New Patented Tri-Step Face Design
9mm Case & Ammunition Gauge - All New Tri-Step Face Design
 
Email a friend Email a friend
Review this item Review this item
Price
Retail Price:  $29.95
Your Savings:  $7.00
Your Price:   $29.95
On sale: 
$22.95
On Sale
Availability:
In Stock
Share |
Quantity
Add to Wish List
Description
9mm Case & Ammunition Gauge - For Checking Your Reloads & Ammo

All New Case and Cartridge Gauge with Tri Step Face Design -  Patented 

Now with Patent Pending Overall Length Indicator Cut !

 

With our brand new advanced Patented Tri-Step and Patent Pending Overall Length Indicator design you will get the best most advanced cartridge measuring gauge made today!

The new patent pending design incorporates a cut in the base of the gauge that measures the minimum and maximum overall acceptable length for your cartridge.  

Until now there was no easy way to measure the minimum acceptable overall length of your loaded ammunition.  Now with this  revolutionary design it's so easy it takes less than a second! Simply drop a loaded cartridge into the gauge and make sure the bullet tip doesn't extend past the gauge base or be less than the bottom of the groove cut in the base of the gauge

(see pictures for diagram explanation).

No longer is it necessary to measure each cartridge with your calipers, taking time and aggravation. This gauge DOES IT ALL!  These new patented and patent pending gauges measure all important aspects of your ammunition.

  • Chamber Headspace

  • Maximum Case Length

  • Minimum Case Length

  • Cartridge Diameter

  • Maximum Overall Cartridge Length

  • Minimum Overall Cartridge Length (NEW FEATURE!)

No need for multiple gauges or to measure each cartridge with calipers, this is an all in one gauge!

The Shooters Box case and ammunition gauges are manufactured right here in Malden Massachusetts, by American workers on American machines! 


The Shooters Box case and ammunition gauges are manufactured right here in Malden Massachusetts, by American workers on American machines! Made from Stainless Steel and built to last a lifetime. Each gauge is manufactured to  S.A.A.M.I. (Sporting Arms and Ammunition Manufacturers Institute) chamber /  headspace specifications. The gauge will measure the maximum cartridge length  (full overall length), the minimum and maximum case length, the maximum case diameter, the minimum and maximum headspace. and now will measure the minimum overall cartridge length!  A loaded cartridge should fit freely and easily into the gauge. A cartridge that does fit properly may not  correspond to the proper chamber dimensions.


The difference between the top step (face) of the gauge and the middle step shows the maximum allowed chamber headspace.

The middle step shows the maximum allowed case length.  A loaded cartridge that is inserted into the gauge should not be higher than the middle step.

The bottom step shows the minimum allowed case length.  A loaded cartridge that is inserted into the gauge should not be lower than the bottom step.

The bottom of the gauge indicates the maximum overall acceptable overall cartridge length and the ‘groove’ in the bottom of the gauge shows the minimum acceptable overall cartridge length.  See the picture for more information.

 

Our innovative patented 3 step face design will measure the minimum case length (lower step), maximum case length (middle step), and also show you  the SAAMI specs for maximum allowed chamber headspace (difference between middle and upper step which is the face of the gauge). See pictures for more  information.

 

Complete Satisfaction Guaranteed !



USA Patent No. D846,276 - European Patent No. 005505526-0001 - UK Patent No. 6039401

 


WARNING!!!  NEVER ATTEMPT TO RESIZE LOADED CARTRIDGES.  THIS IS EXTREMELY DANGEROUS AND COULD LEAD TO AN ACCIDENTAL DISCHARGE CAUSING INJURY OR DEATH.


In some instances your cartridge may sit flush with the lower step BUT the brass may be shorter than the SAAMI minimum specifications.  In this instance your ammunition may still fire and function correctly but it is up to you to confirm this will not cause an unsafe condition.  It is the reloaders responsibility to determine the cause of incorrectly sized cartridges and to correct it.  In some cases ammunition previously fired with maximum powder loads or with abnormally large barrel chamber diameters may not fit this gauge.  This is due to some resizing dies not being able to fully resize the brass cartridge all the way down to it's head. Any ammunition shown in pictures is purely for representation purposes and is not included with the purchase of this gauge.


UPC CODE : 799975919560
Related Items
380 ACP Case & Ammunition Gauge - All New Patented Tri-Step Face Design
380 ACP Case & Ammunition Gauge - All New Patented Tri-Step Face Design
Average Rating 0 Review(s)
Your Price: $29.95
On sale: $22.95 On Sale
44 Rem Magnum Case & Ammunition Gauge - All New Patented Tri-Step Face Design
44 Rem Magnum Case & Ammunition Gauge - All New Patented Tri-Step Face Design
Average Rating 0 Review(s)
Your Price: $39.95
On sale: $29.95 On Sale
30 Carbine Case & Ammunition Gauge - All New Patented Tri-Step Face Design
30 Carbine Case & Ammunition Gauge - All New Patented Tri-Step Face Design
Average Rating 0 Review(s)
Your Price: $39.95
On sale: $29.95 On Sale
243 Winchester Case & Ammunition Gauge
243 Winchester Case & Ammunition Gauge
Average Rating 0 Review(s)
Your Price: $34.95
On sale: $32.95 On Sale
6.5 Creedmoor Case & Ammunition Gauge
6.5 Creedmoor Case & Ammunition Gauge
Average Rating 0 Review(s)
Your Price: $34.95
On sale: $32.95 On Sale
8MM Mauser (8x57) Case & Ammunition Gauge
8MM Mauser (8x57) Case & Ammunition Gauge
Average Rating 0 Review(s)
Your Price: $26.95
On sale: $24.95 On Sale
Recently Viewed Items